Hello every one. My name is Xavier. My 2000 crv ex which is a manual also awd has rod knock. I’ve purchased a jdm b20b and was told that the engine is plug and play. My engine was told to me to have a rks so I was told I will not need to do any wire bypassing or splicing. I have never removed or replaced and engine before. I have looked all over for helpful videos on this job, with not so much luck.
Questions I have
1. Pull engine and trans together? Or sperate to just pull motor.
2. Ive gathered that is is easier to pull engine from bottom. I do have a hoist.
3. I’m trying to figure what all needs to be removed from engine before pulling sick as axles and such
This is my first ever attempt to pull an engine. I will have minimal help as I just moved to Colorado from Chicago and don’t have any mechanically inclined friends who can help me. Thanks in advance for any help.
Questions I have
1. Pull engine and trans together? Or sperate to just pull motor.
2. Ive gathered that is is easier to pull engine from bottom. I do have a hoist.
3. I’m trying to figure what all needs to be removed from engine before pulling sick as axles and such
This is my first ever attempt to pull an engine. I will have minimal help as I just moved to Colorado from Chicago and don’t have any mechanically inclined friends who can help me. Thanks in advance for any help.