Honda CR-V Owners Club Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Inadvertently hacked off the spray nozzle thingie at the top of my CR-V (2008) rear window while scraping ice off.

I have the replacement part, but would like to know if anyone knows how to get into that area of the back gate from the inside. I can see two small slots in the plastic that might take a flat blade screwdriver, but I'm afraid of breaking the plastic. From what I can see that whole plastic piece across the top needs to come off so I can access the hose and nozzle (which have fallen into the cavity somewhere)

Chris
 

·
Registered
Joined
·
2,001 Posts
To remove the inside door panel you need to go to the bottom near the inside handle and pop off the 2 little holders that hide 2 screws. Then the rest pops off.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Thanks - do you mean the two screws on either side of the inside handle? I have to take the entire door apart to get to the top area where the washer nozzle is?
IMG_00000542.jpg IMG_00000544.jpg
 
1 - 3 of 3 Posts
Top