Honda CR-V Owners Club Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
428 Posts
the thing that holds the ODB2 is bare metal and has a hole in the middle, get a short nut and bolt to tighten the ground wire onto it. Make sure the head of the nut and the bolt is wide enough so it will not go thru the hole, and put a small washer on both ends.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top