Honda CR-V Owners Club Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hey guys, when I'm driving and using my signals, I sometimes pull the signal lever towards me. I pulled it one unit, the next unit would be flashing my high beams. Yet I didn't see anything pulling the lever one unit would do? I just push it back and it won't go back any further. I have looked at the owners manual and there isn't any clear answer on there. Sorry if this was an obvious question, but I'm still quite new to my 2016 CRV. It's the EX trim if it helps. Thank you in advance! :confused:
 

·
Registered
Joined
·
141 Posts
Pulling the stalk towards or away from you will turn on your high beams.
Only difference is if you pull it towards you and let go, the stalk will return to it default location.
If you push it away from you and let go, the stalk will stay there.

So, pull towards you if you just want to flash your high beams.
Push away from you if you want to keep your high beams on.
 
1 - 3 of 3 Posts
Top