Honda CR-V Owners Club Forums banner

Starting problems

1133 Views 3 Replies 4 Participants Last post by  kloker
I took my car ( CRV diesel 2.2 2007 £175k) into the garage when it was having problems turning cover, was taking 3-4 turns. Diagnosed as needing new glow plugs.. had these changed however the car would then not start.
Since I have been told needed new Pressure valve, replaced still not working. New pressure sensory, replaced, still not turning on. Since then the pump and injectors were sent off to be inspected. All injectors passed, pumped needing to be replaced. This has been replaced with new and injectors re fitted, car still not working.
The garage have suggested there’s a lot of sediment build up and are washing it though. But it’s still not working.
HELP! Any ideas - the garage seem to be at a loss as to what’s wrong. Currently been there 1 months. Bill is massively mounting!
Status
Not open for further replies.
1 - 1 of 4 Posts
Welcome to the forum! Yes, I'd say have them re-install the old components where the new ones did not solve the problem, and remove them, and the corresponding labor charges, from the bill. Sounds like they are parts replacers, which is not the same thing as a qualified mechanic. Which is what you need to find. You may need a solicitor's help in this. That shop is taking your money.
1 - 1 of 4 Posts
Status
Not open for further replies.
Top