Honda CR-V Owners Club Forums banner
  • Hey everyone! Enter your ride HERE to be a part of December's Ride of the Month Challenge!
1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I’ve been trying to figure this out for a few days now.
With the lights OFF, my right tail lamp only turns on my running light, the left side acts normal, lighting the larger filament for the brake.
With my lights ON, the right tail lamp (where the brake light also is, same bulb, the larger spot) does absolutely nothing. It just stays off.
move replaced bulbs, I’m not sure where I should start with this. Any help is appreciated thanks
138795
 

·
Registered
2016 CRV Touring AWD
Joined
·
4,070 Posts
It could be the contacts within the bulb socket have pushed in so far that contact with the bulb is poor. Needle nose pliers will help you pull the contacts out further.
also bad ground.
 

·
Everything in Moderation
2006 CR-V EX, 5MT
Joined
·
12,168 Posts
In addition, with Gen2s it is useful to verify that you are using the correct bulb. UK Vs (VIN starts with S) use different bulbs than Vs made in Japan (VIN J).

Many of those in-store bulb reference guides do not differentiate... :mad:
 
1 - 4 of 4 Posts
Top