[wussowaj]

2019 CRV visors are drooping and very hard to pull down. Anyone else have this problem? Thank you.

 

[SnakeCharmer]

2019 CRV visors are drooping and very hard to pull down. Anyone else have this problem? Thank you.

Yes. When mine droop far enough to completely annoy me, I will replace it/them.

 

[Packard9]

2019, UK never an issue.

 

[Sean Kane]

I'm having this issue too. REALLY hard to lower and raise and it won't stay completely up against the ceiling. Anyone tried replacing a visor?

 

[fdthird]

Had the problem on our 2018 but fine on our 2022.

 

[Shady714]

Yes, just has to replace mine on my 2019, not covered by Honda Care. A bit hard to remove but super easy to install. 83280-TLA-A12ZB is the part I needed for drivers side , grey color.

 

[redleader74]

DITTO. My passenger side one is very stiff and makes LOUD creaking noise when folding down or up. Will likely just replace it. Can anyone share the part number for the passenger side visor and any videos/diagrams of the removal/install?

 

[patruns]

DITTO. My passenger side one is very stiff and makes LOUD creaking noise when folding down or up. Will likely just replace it. Can anyone share the part number for the passenger side visor and any videos/diagrams of the removal/install?

Take a look here.

 

[Hamaw5xs]

Same problem! Now I just have to leave it down

 

[judyoake]

2019 CRV visors are drooping and very hard to pull down. Anyone else have this problem? Thank you.

I also had this problem and had to replace the driver’s visor a couple years ago.

 

[Waterboyz]

Take a look here.

$200.00 YIKES

 

[TequilaIke]

Buy a new one on Amazon. Watch a video on how to replace. When you get frustrated, take a Dremel tool and grind off the tab on the sagging visor. Set up your new visor as per video.. Pop the new one on and tada! I fought with depressing that tab for an hour. Took a well needed a tequila break, then grabbed my Dremel with a small grinder. On my second tequila now.

 

[schuckb]

FWIW, I did buy one on Amazon. Within two months, the switch on the inside of the sun vision broke and the light became stuck in the on position. My wife was nervous because the visor was hot - in the winter. I took it apart and tried to glue the broken piece. It worked for a while and broke again. I replaced the lights with LED's so they would not be so hot. Now, the visor mirror cover does not stay up so when the visor is down, the plastic cover hangs down. And of course. the light is always on. So, I pulled the bulbs, and we use a rubber band to keep the plastic lid closed.

The Amazon visor was still over $100. I am wishing I bought an OEM visor. I may try a salvage yard first. Just sharing my personal experience.