Hi, I have the 2010 CR-V EX-L and the interior driver side dome light does not work. They had incandescent bulbs, but the driver one stopped working so I replaced them with LED's and the driver side stil doesn't work. Even when I open the door or click it, it doesn't work. Any suggestions?
vadufl
Driver side dome light not working
- Tags
- dome light
I guess you mean driver side 'map light'?
Front Map Light: 8 W x 2
![Honda CR-V. Interior Lights]( "Honda CR-V. Interior Lights")
3. Remove the screws, then remove the map lights (B) and moon roof switch or navigation microphone (C).
4. Disconnect the 3P connector from the map lights and the 10P connector from the moonroof switch or navigation microphone.
5. Check for continuity between the terminals in each switch position according to the table.
![Honda CR-V. Interior Lights]( "Honda CR-V. Interior Lights")
6. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the light assembly.
Front Map Light: 8 W x 2
4. Disconnect the 3P connector from the map lights and the 10P connector from the moonroof switch or navigation microphone.
5. Check for continuity between the terminals in each switch position according to the table.
the little micro switches can fail that switch the light on/off. you can replace the switches from another light.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
