Honda CR-V Owners Club Forums banner

LOCATION of the oil pressure sensor

9.6K views 39 replies 3 participants last post by  Cyberbid  
If you want a back up plan. Have the drain pan ready under the sump, even crack the plug so it's loose and if there is too much oil coming out when you remove the sensor, all you have to do then is remove the plug and drop the oil. But everything is already in place if that makes sense.

Don't forget to tighten the plug though if you don't remove it! 🙈
 
Good question 🤔 I wonder if the PCM is not always receiving a signal from the oil pressure sender, and that's why it flags up a yellow oil warning??

By that logic, changing the pressure sender should fix the issue. Only other thing I could think it being is a broken wire/bad earth 🤷‍♂️