If your 2006 SE is like my 2005 EX, the reverse wire is green/black. It is on the under dash relay box, the first wire in connector P. Not too hard to get too if you remove some of the loom tape. I used a blue Posi-Tap to connect the reverse wire to my replacement HU, an Alpine iLX-107. The camera I added is also an Alpine, a HCE-C1100.

 

Here's what it looks like with the Posi-Tap.

Where did you mount the camera? I installed mine on the outer edge of the plastic bracket above the license plate running the cable though the same hole as the plate light.

I did some testing and found the spare tire showed up when I mounted the camera in the middle above the license plate, so I moved it outward. I think a bit of the tire showing would have been okay though. Either way, there is quite a bit of offset for the image. The radio allowed me to move the guide lines over.

 

colo_artist. Thank you for the much needed info. It was helpful. I mounted the camera under the rear bumper facia. Will have to post pics when I finish the project.

 

Do you have a pic of where you mounted and the view it provides? I may flush mount mine inthe rear bumber but not sure if that will be to low.