Welcome! You may want to let everyone know what year your CRV is.

 

Here is a link to Honda instructions to install accs.
http://estore.honda.com/honda/accessories/installation-instructions/list.asp?year=2013&model=CR-V&modelName=CR-V
Go to the spoiler instructions and look there. This is for 2012 and 2013. I hope this is what you are looking for.

 

hi did you get help with this? I need instructions too...l

 

So do I. The line referred to is for parts and requires a password as in being a Honda employee

 

Look under removal of the plastic cover for an MK1

 

Look under the removal of the plastic cover for an MK1

 

I have a 2007 CR-V and daughter involved in fender bender. The garnish or trim on the lower rear lift gate or fifth door was dislodged. I was able to remove it and purchased a few replacement pins. However, I am having a miserable time trying to reinstall it. I can't keep the pins aligned AND it looks like one needs to slide it up first to catch two metal tabs in the center, just below the latch. I would appreciate ANY and all insight or publications. this thread looks to be the closest I could find.. Thanks in advance.
-Pete

 

BTW, I did review the earlier attached link. Unfortunately it refers to the spoiler on the tailgate. I need help with the exterior trim on the lower portion of the tailgate.
-Pete

 

Hi there,

Has anyone got to the bottom of this?

I want to remove the reverse camera and swap with another car to see if the camera is the fault (intermittent black screen, though with the yellow lines showing and then you open and close the boot and vision comes back).

I think you need to remove the inner tailgate trim and the bit of plastic on the outside.

If you remove the inner trim can you access nuts or something for the outer piece?

Many thanks

 

The lines are overlaid on the image by the computer, the cable probably flexed too much though it's possible it's the power feed to the camera. Check both carefully.

 

I see the outer plastic piece has 2 clips at least. Are there more? Any tips on removing the reverse camera?

 

I can't post links yet but you can find a video called "Honda CRV - Back Door/Window Sticking FIX" on Youtube that shows how to do it!

 

Did you ever have any success with this ? I am in the process of trying to do it right now and would like some help. Thank you

 

Thanks, Jillian. I was worried that I was the only one who couldn't find the answer on how to remove that plastic panel on the outside of the tailgate - anyone know?

 

Confusing, I thought this thread was about the tailgate INTERIOR trim, but then "plastic panel on the outside of the tailgate" is mentioned ...

Anyway, regarding tailgate interior trim of generation III (2007-) :

 

Tailgate interior trim Gen II (2002-)

 

Exterior tailgate trim of Gen II (2002-) :

View attachment 103562

View attachment 103570

 

Could you repost your attachments I"m unable to open them.

Thanks denny

 

Exterior tailgate trim of Gen III (2007-) :

 

Great information on the interior tailgate trim. I wish I could find something similar for the plastic cover plate on the exterior; the one covering the door handle. Thanks.

 

Is it here (Cr-V 1997-2000) ??:

 

The diagrams are super useful, thanks!