[ronlong2023]

Thanks. I'm not sure if these apply to my auto.
I was hoping to see a diagram showing the wiring of the tail-lights, brake lights, and signal lights.
My 2022 CRV and my "new" 2024 CRV are wired differently back there (for rear signal lights).
In the 2024 model, the signal light wiring is external to the main harness and connector. And the signal lights L and R rear, are both bulbs, not LED. All the rest of the lighting on the car is using LEDs.

To explain why I care, I bought some LED light fixtures (from eBay - China) that replace the small reflectors that are on the lower rear bumper of the car.
But the wiring harness (from China) is not correct. It assumes that all wiring (including signals) is in the main wiring harness ... it is not.
But this product was okay on 2022 CRV. That is, the small wiring harness on the add-on thing.
But the 2024 Hybrid is different. The signal light circuits (in the rear) are powered by 2 wires external to the main connector back there.
I am about to go through it and identify which wires do what, with my multi-meter, but I thought i would see if there was a diagram out there that could help.
Thanks again,
Ron L.

 

[ronlong2023]

I'm not seeing any attached wiring diagrams.
I am specifically interested in the 2024 CR-V.
Not sure if I am just blind and not finding them.

Thanks,
Ron

 

[ronlong2023]

Is there any way to get a copy of wiring diagram of the rear lights on 2024 Hybrid Touring?
Main rear light is in one connector ... rear signal light is on its own 2-wire connector.

Hi and thanks. I see the wiring info for the rear lights on this diagram.

The wiring for the rear light has 3 wires ... taillight, brake, ground.
There are 2 other wires for the signal light are to an incandescent bulb ... signal, ground.

I'm taking it apart again the try and finish the mod.

Thanks,
Ron