You are not alone. Honda has been very slow to release the details on this vehicle. The body repair manual was just published, so I'm hoping the service and electrical manuals will soon follow.

 

I've actually figured it out and installed an amp. It took a little work, but I finally got a wiring diagram from one of the Honda Dealerships. I went to the parts department and got a printout there. They accessed it on their computer and I was set. Just let them know your vin number so they get you the right one.

 

FOr poops and giggles how did you install your amps? Hi-Lo converter off factory stereo? Trying to understand what you meant by "spliced in to their 2012 harness to install amps and such?"

 

FYI...anyone who needs vehicle wiring info PM me.. I have a business account for Directechs.com.

 

2013 crv wiring info.



Hello. I was just wondering if you could provide me with a wiring info for a 2013 crv exl. I want to install led door sill on my car and want to know which wire should I take the power from. Thank you

 

I used a Scosche 4channel lineout converter and snipped the speaker wires at the harness. From the LOC I sent rca cables to the amp in the back. Sent speaker wires back along the same route to the harness and connected them to the outgoing wires. I was going to go straight to the speakers until I discovered the molex in the door wiring, and didn't feel like drilling through the plastic on them. If you check my profile on hondasuv you can see an album with some pictures of it.

 

Would you still be able to get the wiring diagram for a CRV audio navigation unit (P/N: 39540-SWA-E080-M1) please? It's a UK Ex model (3rd Gen).

Would also appreciate the wiring diagram for Gen 3 CRV stereo unit (P/N: 39100-SWA-G012-M1) please.

Looking forward to hearing from you.

Thanks.

 

Read through this discussion. There are some wiring pin-outs and diagrams posted for Nav and Non-Nav.

http://www.crvownersclub.com/forums/20-mobile-electronics/19491-2012-cr-v-ex-audio-upgrade-project.html

 

Here is a link to a number of different 2012 CR-V radio types and pin-outs.

http://www.pdf-archive.com/2015/12/18/crv-cr-v-radio-connector-pins/crv-cr-v-radio-connector-pins.pdf

 

Thanks very much Jepalan. Mine is a 2012 3rd Gen facelefted CRV. I'll read through the notes and will pick out any relevant bits.

 

On previous links i can't find the wiring diagram for a CRV audio navigation unit (P/N: 39540-SWA-E080-M1, REF.NO.BB730PO). It's a IT 2.2 i-DTEC Advance model (3rd Gen) with navi, amp, subwoofer, rearcamera.
Anyone can help me to find it?

 

The connector pinouts for the audio nav units and the factory amplifier are provided in this post...
http://www.crvownersclub.com/forums/20-mobile-electronics/19491-2012-cr-v-ex-audio-upgrade-project.html#post122983
I don't have the actual wiring diagrams however.

 

Hi Jepalan, thanks for answer.
I already looked at post you have linked but no found my radio unit, this is my back side:

 

Hi Jepalan, thanks for answer.
I already looked at post you have linked but no found my radio unit, this is my back side:

Is that from a European model CRV?

The 9 connectors on your radio should match the pinouts of the 9 connectors on the first pages of this document:
https://drive.google.com/file/d/0Bys-c8aVt18mQy1IU0pUSUJwb0k/view?pli=1

Look closely at the indexing on each connector in the drawing to cross-correlate yours with the ones in the pdf doc.
It's easier if you flip your picture upside down.

 

Yes, it's an European model (Italy).
My connectors are like this that i have found at 8thcivic.com forum, but wires colours are different from Civic to my CRV:

Here you can see my CONNECTOR A (24P), dark grey, but wires colours order is different from doc you have linked:

Thanks for your help

 

Yes, it's an European model.

My connectors are very similar to picture in first page of the doc, but wires number and colours don't matches.

For example, this is my (24P) CONNECTOR A:

Do you think i can anyways correlate the pin order of wires?

 

Humming Noise from engine

Hi Everyone;

I just finished my audio upgrade installation on my CR-V 2012. I wanted to keep the navigation head unit so i used a Kicker KISLOC but i´m getting humming noise on my speakers. I checked both amps (Rockford and JL Audio, both are new) and both are not making noise to the RCA´s. Also checked the crossover and seems to be fine. My guess is that the LOC is making it. I grounded it directly but it was the same. Should i get a new LOC? Any brand suggestion? I didn´t want to spend that much on a LOC, but if needed, maybe i should get an Audiocontrol... If anyone has experienced any similar trouble, please let me know.

Kind regards from Mexico

 

Hello. Would you be able to get me the wiring diagram for a CRV (2017) audio navigation unit (P/N: 39100-T1V-G55-M1) or similar please?
I am interested in harness wiring of connectors and wire colors in particular.
Tank you very much
My email: jtomka@email.cz